Got Questions? Ask Us!

What do the different buttons do? 

• The power button turns on the Omnicharge
• The AC Outlet button switches the device to AC power charging
• The USB Outlet button switches the device to USB power charging

How do I use the Omnicharge?

• Begin by checking the OLED screen. If the screen is lit up the Omnicharge is on. 
• If the Omnicharge is on, you can plug in your cable. Choose the USB A ports, or in the AC port (the wall outlet port). Your device will begin charging immediately.
• If the Omnicharge is off, press the power button and turn the device on. Then plug in and begin charging your device. 

How can I tell how much power is left on the charger? 

• Check the OLED screen for the percentage of battery left in the Omnicharge.
• You can find the battery percentage icon in the top right corner of the OLED screen.  
• If the battery is drained before your device is done charging, return the Omnicharge to the circulation desk and see if you can check out a new Omnicharge.

How do I switch between USB and AC power charging? 

• To switch between AC and USB power, press the corresponding button to the right of the OLED screen. 
• The button on the top is the AC Outlet button. 
• The button on the bottom is the USB Outlet button.

How do I charge wirelessly?

• Place your phone atop the “Wireless Charging” sticker on the top of the Omnicharge. 
• Your device should connect and begin charging automatically. 
• If your device does not charge, try taking off your phone case while charging. 
• If it continues to not charge after you’ve removed your case, try adjusting the position of your phone. 
• The Omnicharge manual recommends placing your phone horizontally, aligned with the back edge of the Omnicharge.